Engineering & Technology
Received: 16 Mar 2018 , Published: 23 April 2018
Views: 143 , Download: 62
|1||K.Sheeba,J.Gowthami, V.Gunavathidevi, M.Malathi, S.Sangeetha.|
Headlights of vehicles great danger during night driving. The drivers of most vehicles use high, bright beam while driving at night. This causes a discomfort to the person travelling from the opposite direction and therefore experiences a sudden glare for a short period of time. This is caused due to the high intense headlight beam from the other vehicle coming towards the one from the opposite direction. In this project, an automatic headlight dimmer which uses a Light Dependent Resistor (LDR) sensor has been designed to dim the headlight of on-coming vehicles to avoid human eye effects. This automatically switched the high beam into low beam, therefore reducing the glare effect by sensing the light intensity value of approaching vehicle and also eliminated the requirement of manual switching by the driver which was not done at all times. Arduino Uno software was employed in designing the project. The system device was able to automatically switch the headlight to low beam when it sensed a vehicle approaching from the opposite side using LDR sensor.
.AUTOMATIC HIGH BEAM CONTROLLER FOR VEHICLES
A.S.M Asaduzzaman, Mohammad Mahmudul Islam, Shuva Paul, Md Farhat Alam, Md Mashuker Rahman
.AUTOMATIC HIGH BEAM CONTROL FOR DRIVER ASSISTANCE SYSTEM
Anusha Viswanadha1, G. Tirumala Rao2, B. Sai Surendra Mohan3
.AUTOMATIC HEADLIGHT DIMMER A PROTOTYPE FOR VEHICLES
Muralikrishnan.R, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 pISSN: 2321-7308.